Waterproofing - Castelatto
Compartilhar

Waterproofing

Waterproofing

Caso sua dúvida não seja solucionada em nossas respostas, envie-nos um e-mail
para sac@castelatto.com.br ou utilize nosso formulário clicando aqui.

What should I observe before carryng out the waterproofing of my product?

Before any application, make sure the coating is completely dry and free of moisture.

The coating must be dry to perform waterproofing?

Yes, the coating should be completely dry and free of moisture.

What is the time needed for waterproofing external areas?

The time required is 24 hours, depending on the weather conditions.

What is the time needed for waterproofing internal areas?

The time required is 48 hours, depending on the weather conditions.

What is the correct procedure for the application of the water-oil proofing?

First make sure the coating is completely clean and dry, then apply two hands of the protective with a sprayer. The interval between each application should be 2 hours.

What is the drying time of the water-oil proofing?

The final drying time is approximately 12 hours.

What is the correct procedure for the application of the solvent based sealant??

First make sure the coating is thoroughly cleaned and dry after a minimum of 72 hours after the product is seated / laid. Apply the product on the roll without soaking it and remove the excess in the paint tray. It is important that the product does not run during application to avoid damaging the final appearance of the part.

What is the solvent base sealer drying time?

The final drying is approximately 24 hours.

What is the correct procedure for the application of PU Resin?

First make sure the coating is thoroughly cleaned and dry after a minimum of 72 hours after the product is seated. Apply the resin with a short coat brush in a single hand.

What is the drying time of PU Resin?

The final drying is approximately 48 hours.